Carpet steam cleaning: Professional vs. DIY

July 7, 2021 Off By Alicia Hunt

Cleaning your carpets is an unpleasant chore, but it is necessary and necessary. It should be done at the same frequency as spring cleaning. Carpet owners will typically only clean their carpets once every two years, with some carpet owners not having to do it at all. Carpet cleaning does more than just remove stains. Carpet cleaning will prolong the life of your carpet.

How Often Do You Need to Clean Your Carpets?

Depending on how much traffic your carpet receives, manufacturers recommend that it be cleaned every 12-18 months to keep it looking good. This frequent cleaning is actually a condition of many warranties. Make sure you read all warranty information.

Nylon Carpet

Regular cleaning is essential for all carpet types, but it is particularly important for nylon carpeting. Nylon is made up of a hydrogen molecule. This is the main reason nylon has a high degree of resilience. Cleaning activates the hydrogen molecule and causes the fibers to bounce back after they have become flattened by foot traffic. Cleaning will revive your carpet and improve its performance.

Hot Water Extraction, and so-called “Steam Cleaning”

Carpet manufacturers recommend hot water extraction for carpet cleaning. This is also known, though slightly incorrectly, as steam cleaning. The hot water extraction process involves spraying hot water on the carpet, and then sucking it back into the machine along with any dirt. To help remove soiling, a cleaning agent is often added to the water. For best steam cleaning service steam carpet cleaners Athens GA is best for you.

This is not true steam cleaning. Today, however, it is generally accepted that steam cleaning refers to hot water extraction. This is the most common method of cleaning carpets.

Professional Carpet Steam Cleaning

Professional cleaners can use either a truck-mounted or portable unit. A portable machine offers obvious advantages, including the ability to use in apartments and condo buildings where a truck-mounted unit is not possible. Truck-mounted units have a greater power than portable units, so they should be used wherever possible to maximize efficiency.

DIY Carpet Steam Cleaning

You can rent or buy a variety of DIY steam cleaning machines. There are so many machines available that it can be hard to decide if you should hire professionals or just do the job yourself.

A small cleaner is worth having in your home in case of spills or other accidents that can be difficult to clean. For a more thorough cleaning of your carpet, however, it is highly recommended that you hire a professional.

DIY: The risks

The DIY machines don’t heat water at the same temperature as professional machines. This results in less effective cleaning. These machines are also not as powerful and efficient as professional ones, so they can’t extract as much water (and dirt) from your carpet.

After it has been properly cleaned, carpet should only be slightly damp. Carpet that is wet indicates that the machine is not strong enough to complete the task. Fans can be used to speed up drying if your carpet is very moist. Don’t replace furniture until the carpet is dry completely.

Other variables include the amount of carpet shampoo and the method used to clean the carpet. How fast or slow you can move across the carpet. There are many ways for DIY machines to fail, but not as often as professional cleaners.

Cost-saving Concerns

You don’t have to pay a professional to clean your carpets. Instead, focus on the “traffic” areas. The cleaner will simply clean around your large furniture pieces, such as the couch, bed, and other big pieces. You won’t see your carpet underneath these large furniture pieces. It is also not exposed to light, air, and foot traffic like the rest of the carpet. Therefore, it doesn’t need cleaning as often.

If you move furniture frequently, it is best to clean the entire surface. It is cheaper to clean the areas that are most used than the whole area.